...
YES WE ARE OPEN EMERGENCY SERVICE AVAILABLE

Table of Contents

Common mistakes homeowners make with a sump pump 

A sump pump is used to remove the gathered water into a sump basin in the basement of the house. Sump pumps are the solution to flooding and dampness in the basement, and the primary purpose is to send the water away from your home. However, there are a few ways water may enter the sump pump.

Types of sump pumps

Submersible sump pump. 

A submersible sump pump is completely immersed in the water. This saves space, and your basement looks more appealing to the eyes. It has a high-power motor and can pump 1000 gallons of water per hour. When the pump detects water, it begins to run and shuts off itself when the work is complete. This type of pump is appropriate if your home is situated where there is plenty of rainfall. Sump pumps also have a filter to put away debris and prevent clogging. Submersible sump pumps are more expensive than other pumps and have a short life expectancy of up to 10 years. They are not easily repaired, and it is challenging to restore them.

Pedestal sump pumps

 These are known as upright pumps. The motor is situated on the exterior and is supported by a column attached to the casing of the pump. The motor is kept above the sump so that it does not come in contact with water. Therefore it is easy to access the motor and repair it, and the motor is less likely to suffer damage from the water. Pedestal pump has a reasonable life expectancy and can last up to 25 years. The pedestal pumps are less noisy than the submersible pumps. 

Water-powered sump pumps.

These are unique pumps that use water pressure from a Municipal source to create a vacuum and suck water from the sump pit. However, the pressure from the city water should be relatively high to promise the efficiency of the pump. Water sump pumps are specially used as a backup for the sump pumps in case of a water outage. They do not have any motor battery of moving parts and do not require any maintenance, and have a really long life span. 

Effluent sump pump 

it is also known as a lift pump. These kinds of pumps are used in homes with an effluent tank. Effluent pumps a different from sewage pumps as they remove wastewater that collects in bathrooms, laundry sinks, and showers and then pumps it into the feed for the effluent disposal area. These pumps, when installed, run automatically. they must be repaired and maintained by licensed plumbers. These sump pumps are very durable depending on how frequently the tank fills up and how hard the pump has to push greywater into the leach field.

Combination sump pumps

Combination sum pumps teachers to pumps into types of power sources. The primary pumping and power supplied by the larger pump and turn off AC power. The combination sump pumps must be checked every six months during the fall and spring season. They prevent floods and water damage in homes.

Does your home need a sump pump or not ?

The necessity of installing a sump pump depends on the location where your house is situated. If you are located in a place with heavy rain, then it is a good idea to have a sump pump to prevent the possible flooding of your basement. Sump pumps are basically required when your home is situated in a Low area. The American Society of home inspectors has estimated that 60% of Americans have some sort of moisture in the basement spaces. The humidity in the basement can lead to mold growth which results in contamination of water and some health problems.

How to maintain a sump pump?

Sometimes the sump pump can overflow if it is not pumped correctly. Therefore, it is crucial that you have a backup system for your sump pump in the event of a primary power failure. It is helpful in case of a power outage of your house for an extended period in case of a storm. 

Common mistakes that we make with the sump pumps

 Letting the debris get into the pump. 

You must make sure that your sump pump does not sit on some loose silt or gravel that could be easily sucked up into the pump. It can cause a problem by clogging your pump, which can ruin the motor.

Float switch issues

afloat switch tells the sump pump motor to stop once the water level is low because it needs to tell your sump pump that it needs space around the float. If there isn’t sufficient room or any obstruction in the way, the float will cause the pump to work in properly and Burn up your motor.

Not testing your sump pump,

 you must get your sump pump tested if it is constantly working or isn’t working usually or in the case it doesn’t start.

Broken discharge pipe. 

A broken pipe means when you go into your basement, and you find everything is floating. The worst-case scenario is when your line is broken, and you cannot know that there is a problem until it’s too late. Therefore, it is always advised to check your discharge pipes whether it leads out from your house or if you have an underground system.

The biggest mistake is not taking professional help when required. You should always take professional service to get the problem inspected and repaired. 

If your sump pump suddenly stops, it means there is some loose wiring problem associated with it. Without checking something simple as the wiring, you may be overlooking something that is simple to fix to get the pump back in working order. to check the wiring:

  1. Turn off the power of your pump and disconnect the pump.
  2. Check for the fuse wires and replace the ones you find faulty.
  3. Install the pump again and restore the power.

In case you face any problems with the sump pump, call us to get in touch with the best technicians in your area.

 

[contact-form-7 id="4061"]
[contact-form-7 id="4061"]